Assessing the Availability and Allocation of Production Capacity in a Fabrication Facility Through Simulation Modeling: A Case Study
DOI:
https://doi.org/10.23055/ijietap.2008.15.2.117Keywords:
Simulation, capacity analysis, capacity allocationAbstract
For a tier two automobile supplier’s fabrication facility, the manufacturing process required producing two classes of products, those produced on a repetitive and those produced on a periodic basis. Static capacity analysis determined if sufficient gross capacity existed in the production system in order to meet customer demand but was unable to determine if the capacity was available at the desired times to preserve an acceptable service level. A simulation model was developed to confirm the sequencing and scheduling of both classes of products. The model also incorporated the logistical constraints of customer supplied materials used in the production process. The simulation output was able to evaluate the system performance metrics regarding material availability, transportation efficiencies, product backorders, and interruptions to the production process. The model provided a planning tool that assessed the quarterly production plan; identified customer service issues and evaluated the impact of continuous improvement efforts.Downloads
Published
How to Cite
Issue
Section
License
The Author(s) must formally transfer each article's copyright before publication in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING. Such transfer enables the Journal to defend itself against plagiarism and other forms of copyright infringement. Your cooperation is appreciated.
You agree that the copyright of your article to be published in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE is hereby transferred, throughout the World and for the full term and all extensions and renewals thereof, to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE.
The Author(s) reserve(s): (a) the trademark rights and patent rights, if any, and (b) the right to use all or part of the information contained in this article in future, non-commercial works of the Author's own, or, if the article is a "work-for-hire" and made within the scope of the Author's employment, the employer may use all or part of the information contained in this article for intra-company use, provided the usual acknowledgments are given regarding copyright notice and reference to the original publication.
The Author(s) warrant(s) that the article is Author's original work and has not been published before. If excerpts from copyrighted works are included, the Author will obtain written permission from the copyright owners and credit the article's sources.
The author also warrants that the article contains no libelous or unlawful statements and does not infringe on the rights of others. If the article was prepared jointly with other Author(s), the Author agrees to inform the co-Author(s) of the terms of the copyright transfer and to sign on their behalf; or in the case of a "work-for-hire," the employer or an authorized representative of the employer.
The journal does not provide the author copy of the final paper when it is published. The author(s) can make(s) a subscription to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE if they want to get the final paper that has already been published.
The journal is registered with the Library of Congress (ISSN # 1943-670X). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the journal.
The author reserves patent and trademark rights and the right to use all or part of the information contained in the article in future non-commercial works.
